Description
Specification
Reviews (0)
| Specification | |
| Item number | GF-72 |
| Viewers | 44 |
| Dimensions | |
| Length | 10.00 cm |
| Width | 7.00 cm |
| Height | 1.50 cm |
There are no reviews for this product.
Apply the wax over the non-sticky topcoat. If you are using a non-sticky top, use a degreaser beforehand and then use the wax.
The most important factor for the mirror effect is the curing time of the non-sticky top, which will serve as a substrate. The time depends on the power of the lamp (usually 30-45 seconds). In case you could not achieve a perfect rubbing, it is recommended to wipe the top with a degreaser. The wax is overlapped with one or two layers of the top, sealing the ends more thoroughly than usual.
The most important factor for the mirror effect is the curing time of the non-sticky top, which will serve as a substrate. The time depends on the power of the lamp (usually 30-45 seconds). In case you could not achieve a perfect rubbing, it is recommended to wipe the top with a degreaser. The wax is overlapped with one or two layers of the top, sealing the ends more thoroughly than usual.
POWDER BAR-BE AURORA PIGMENT
reflective glow
easy application
ultra-thin coating
chrome shine
easy application
ultra-thin coating
chrome shine
ADVANTAGES:
Powder Bar-Be Aurora Pigment is a mirror dust for designing very bright nails. The wax allows you to make an irresistible chrome manicure with gorgeous fashionable shades.
The color of the coating on which the pigment is applied is just as important as the gel polish itself. Since the pigment is translucent, the mirror effect can be tinted depending on the color of the gel polish.
The pigment should be rubbed onto the Diamond Top from Globalfashion.
It is very important that the top coat is as even as possible, without bumps and bubbles - all these small imperfections will stand out strongly under the wipe.
The diamond top should be well dried before the procedure, you can even double the polymerization time in the lamp.
Waxing can be done with your finger, a sponge, a shadow applicator, a silicone brush, or something else of a similar nature
It is not necessary to rub the pigment strongly, so that the glitter that has already stuck does not rub off.
It is not necessary to use a native brush from the top - it is better to allocate a separate brush, so that the glitter did not end up in the bottle.
After waxing, you need to shake off the excess particles very well, otherwise the top will easily catch them.
Before covering the wax top, don't forget to file the end a little.
This will help get rid of the glitter on it and qualitatively seal the nail with the design. The end should also be well sealed with a top. If this is not done, the finish may eventually peel off and the design on the tips will wear off.
The pigment should be rubbed onto the Diamond Top from Globalfashion.
It is very important that the top coat is as even as possible, without bumps and bubbles - all these small imperfections will stand out strongly under the wipe.
The diamond top should be well dried before the procedure, you can even double the polymerization time in the lamp.
Waxing can be done with your finger, a sponge, a shadow applicator, a silicone brush, or something else of a similar nature
It is not necessary to rub the pigment strongly, so that the glitter that has already stuck does not rub off.
It is not necessary to use a native brush from the top - it is better to allocate a separate brush, so that the glitter did not end up in the bottle.
After waxing, you need to shake off the excess particles very well, otherwise the top will easily catch them.
Before covering the wax top, don't forget to file the end a little.
This will help get rid of the glitter on it and qualitatively seal the nail with the design. The end should also be well sealed with a top. If this is not done, the finish may eventually peel off and the design on the tips will wear off.
gr.
0.5
CRAFTSMANSHIP:
APPLICATION METHOD:
GF-T05
GF72
GF32
GF22
GF09
GF04
GF-T09
9204
9203
9205
9207
9202
10655
9206
Stirka Nail Bar – Be Aurora Pigment GF-72: The Ultimate Nail Extension Decor If you’re a nail enthusiast or professional, you know that nail art and decor are imperative to a perfect manicure. If you’re looking for the next big thing, look no further than the Be Aurora Pigment GF-72 from Stirka Nail Bar. Be Aurora Pigment GF-72 is a powder that can be applied to nail extensions to create a holographic iridescent effect. It’s a unique product that’s easy to apply and can transform any nail extension into a work of art. At Stirka Nail Bar, we’re dedicated to providing the highest quality products for our customers. Our Be Aurora Pigment GF-72 is created with safe, high-quality ingredients that are designed to last. It’s easy to use and can be applied by any nail professional. To use the Be Aurora Pigment GF-72, start by applying a base coat to your nail extension. Next, apply a layer of your desired color nail polish and allow it to dry completely. Using a sponge applicator or a brush, apply the Be Aurora Pigment GF-72 onto your chosen nail extension. Gently rub the powder onto the nail until it appears smooth and evenly applied. Finish off by applying a topcoat to seal the pigment. What’s great about the Be Aurora Pigment GF-72 is its versatility. It can be used on a variety of colors and shades, making it suitable for every occasion. Whether it’s a wedding, party, or just a casual day out, your nails will look stunning and eye-catching. In summary, Stirka Nail Bar – Be Aurora Pigment GF-72 is the hottest product for any nail enthusiast, whether you’re a professional or DIYer. It’s easy to use, versatile, and perfect for every occasion. So what are you waiting for? Add Be Aurora to your nail decor routine and watch your nails transform into a stunning masterpiece.
