Voskoplav G-700

Instructions for use:

Warning - always check the temperature of the wax before applying!

1. Place the collar ring on the rim of the machine.

2. Remove the plastic cover.

3. Adjust the wax jar holder on the wax jar for easy handling.

4. Using the temperature regulator, set it to 100 ° C until the wax reaches a liquid consistency.

5. This process takes approximately 15 minutes. For faster heating, place the cover on the heater.

6. As soon as the wax becomes liquid, change the temperature on the wax heater to the holding position. The temperature will remain constant throughout the day. It's important to check the temperature of the wax by placing a small amount on the inside of your wrist.

7. When the wax is finished, remove the can.

8. Turn off the heater every night by turning fully counterclockwise. Cover with a transparent lid to prevent dust from entering the wax.

9. To reuse, repeat steps 1 to 7.

Warning - very hot wax can cause burns!

For professional use only

For best results, be sure to read the instructions carefully before using the wax heater.

Specifications:

Power: 120W

Volume: 500 ml

Voltage: 220-240 v / volt

Frequency: 50/60 Hz / Hz