Frazier Glaring machine 35000 rpm. This unit is intended for hardware manicure and correction gel and acrylic nails. Key features of any router is power, rotation speed and torque. Power consumption is measured in cottons and shows how Frazier uses of electricity. Power Fraser Glaring machine 35000 65 Wat. The rotation speed is measured the number of revolutions of cutter per minute, the maximum rotation speed of a router 35000 rpm. Torque shows the power at which the rotation of the cutter. The higher the torque, the more they need external forces to stop the cutter. Torque Glaring machine 35000 1 Newton/cm. Thus, this router allows you to make only hardware manicure and nail correction, but not suitable for hardware pedicure. The kit includes a power supply, handle, stand by press the pedal, the set of nozzles (6 pieces) and 6 disposable caps. Handle motor easy and small, fits comfortably in the hand. Its weight of 240 gr. Length 14 cm It is made of metal. To use router is very simple. Connect the handle to the power supply. Also turn on the pedal for nianogo management, if you are going to use it. Before switching on the router necessary to install the nozzle. Mechanism nozzles faced with the reality of the cutter and holding her tightly, the heart prevents vibration in time robots. To avoid breakdowns are not recommended to close the handle without insert or core plugs. Turn on the power using the button on the front panel of the unit. When you enable lights up red button. In manual control the mechanical the regulator on the power supply which is adjustable rotation speed mills. Mode foot control you need to turn the power off with the button on the control panel, with a mechanical regulator set the speed rotation. When the pedal is depressed, the router starts to work and light up a light bulb with the right of the power regulator. To enable the reverse, that is, rotation in the opposite side, you need to turn off the router. To do this, move the controller speed on 0 or release the foot from the foot control, then expose switch reverse mode R and then restart the router. In to avoid breakage, do not enable the reverse on the go. Noise and vibration can not be attributed to the advantage of this router, so don't recommend it for professional use. It is more suitable for infrequent work for work out of town or for home use.
Frazier Glaring machine 35000 rpm. This unit is intended for hardware manicure and correction gel and acrylic nails. Key features of any router is power, rotation speed and torque. Power consumption is measured in cottons and shows how Frazier uses of electricity. Power Fraser Glaring machine 35000 65 Wat. The rotation speed is measured the number of revolutions of cutter per minute, the maximum rotation speed of a router 35000 rpm. Torque shows the power at which the rotation of the cutter. The higher the torque, the more they need external forces to stop the cutter. Torque Glaring machine 35000 1 иновацияton/cm. Thus, this router allows you to make only hardware manicure and nail correction, but not suitable for hardware pedicure. The kit includes a power supply, handle, stand by press the pedal, the set of nozzles (6 pieces) and 6 disposable caps. Handle motor easy and small, fits comfortably in the hand. Its weight of 240 gr. Length 14 cm It is made of metal. To use router is very simple. Connect the handle to the power supply. Also turn on the pedal for nianogo management, if you are going to use it. Before switching on the router necessary to install the nozzle. Mechanism nozzles faced with the reality of the cutter and holding her tightly, the heart prevents vibration in time robots. To avoid breakdowns are not recommended to close the handle without insert or core plugs. Turn on the power using the button on the front panel of the unit. When you enable lights up red button. In manual control the mechanical the regulator on the power supply which is adjustable rotation speed mills. Mode foot control you need to turn the power off with the button on the control panel, with a mechanical regulator set the speed rotation. When the pedal is depressed, the router starts to work and light up a light bulb with the right of the power regulator. To enable the reverse, that is, rotation in the opposite side, you need to turn off the router. To do this, move the controller speed on 0 or release the foot from the foot control, then expose switch reverse mode R and then restart the router. In to avoid breakage, do not enable the reverse on the go. Noise and vibration can not be attributed to the advantage of this router, so don't recommend it for professional use. It is more suitable for infrequent work for work out of town or for home use.
| Specification | |
| Viewers | 3 |
There are no reviews for this product.
